water

Gutter Protection Systems

Keeping your gutters clean and free of debris, dried leaves, and dead branches will reduce fire hazards. Additionally, your water will flow freely from your roof into your gutters, through your downspouts, and into your drainage system.

Construction: Gutterglove Pro, Gutterglove Ultra and Gutterglove IceBreaker consists of two components, a perforated aluminum channel and type 316 stainless steel mesh. The stainless steel mesh is glued into grooves along both sides of each 5 foot aluminum channel section. It installs on any existing gutter. Gutterglove's specifications were designed so that it simply slips under the roof shingles and fits snuggly to the front lip of your gutter. Gutterglove should be installed at the same pitch as the roof (up to 5/12) to get the best performance of debris shedding off. However, it's not necessary to install Gutterglove at greater then a 30 degree pitch.

Aluminum Channel Frame: The extruded aluminum support frame is anodized to further protect itself from the environment and to make it more adaptable to be installed on a copper gutter. The anodizing process converts the aluminum surface into an extremely hard, durable, corrosion resistant, long-lasting aluminum oxide finish. Anodizing also responds favorably to current governmental regulations because it is one of the most environmentally friendly industrial processes. Since this process is a reinforcement of a naturally occurring oxide process, it is non-hazardous and produces no harmful or dangerous by products. Anodized aluminum is used around the world as highly durable exteriors in commercial buildings such as one of the world’s tallest buildings, the Sears Tower in Chicago, Illinois. Other revolutionized uses are in scientific instruments, home appliances, satellites in space for harsh environmental protection, staircases in skyscrapers and a host of other uses.

Gutterglove is the ONLY gutter guard in existence that uses an anodized extruded aluminum profile.

Stainless Steel Mesh: The super-strong type 316 stainless steel mesh allows more than 150 inches of hourly rainfall to filter through to your gutter. Type 316 is molybdenum-bearing austenitic stainless steel which is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium nickel austenitic lower quality stainless steels such at types 302 and 304 or any other standard stainless steel alloys. The pots and pans manufacturers that are highly promoted at home and garden shows for their non-corrosive attributes are only type 304 stainless steel.

The 316 alloy offers higher creep, stress-to-rupture and tensile strength at elevated temperatures. It also resists attack of marine and corrosive industrial atmospheres which makes it an ideal component for Gutterglove. Type 316 stainless steel alloy is widely used in the food, marine and medical industries.

*Installation Services Available

KEY BENEFITS

  • Keeps out leaves, pine needles and small sand grit from your gutters!
  • Eliminates gutter cleaning forever!
  • Fits on virtually any existing gutter and rood type!
  • Great for rain harvesting!
  • Your gutters will never clog!
  • Handles over 150 inches of hourly rainfall!
  • Translucent appearance makes it blend in with the color of your roof!
  • Low cost gutter protection system!

FULL PROTECTION

LeafBlaster gutter protection system brings gutter guard technology to a whole new level.
It’s made from 316 surgical stainless steel mesh and a hardened aluminum extruded drip edge and will fasten easily to the front lip of your gutter and installs on any roof type

LeafBlaster’s unique design makes it low coast because it doesn't need a metal support frame to hold it up. It uses a series of corrugated “V” bends to create it unusually strong support structure.

Rainwater Harvesting & Water Storage Systems

Droughts are real, which means water collection is key! Here are a few products that can help collect, filter, and store water for later use.

Rain Barrel Collects rain water from downspouts for irrigation and emergency use. Comes in 60 gallon tanks or larger, available in four colors: taupe, terra cotta, dark moss, and charcoal.

  • Quick and easy to install and winterize
  • All parts for installation and use are included
  • Includes spigot and garden hose adapter
  • Includes connection kit for downspout
  • 3 year full replacement warranty included

Rainwater harvesting has been around for decades, but only recently has it received national attention due to water shortages throughout the United States. Since harvesting rainwater is relatively new to the USA, many of the available tanks and barrels are not suitable for the average home and garden; They are either too small or too large. With this in mind, Bushman has designed rainwater harvesting tanks that may be a better fit for your smaller residential and commercial needs. We offer two lines of tanks, including a Slimline Series and a Round Series, which allow customers to choose which style fits their application best. All tanks come with features and benefits that set them apart from conventional farm tanks, allowing customers to store rainwater safely for months at a time.